Useful adjustment settings
For adjusting a picture's horizontal and vertical position.
Press MENU and the MENU screen displays.
Press _/_ to select "Setup".
Press A/Y to select "Position", and then press ENTER.
Press A/T to select
¸¸ ¸
V=Pos. | Centers the image by moving it up or |
| down. |
You can move the picture around on the screen.
Press A/T/_!/_ to move an image on the screen to the desired position. Press ENTER to return to the original image oosition.
',While pressing ,_/T/4/_, an
®This setting cannot be stored. Once the TV shuts down or enters standby mode, the setting is erased. To move the picture around the screen again, you must perform the above procedure again.
®The image position setting using the steps on this page can be stored. Select either according to your objectives.
®"TV', "INPUT1 ", "INPUT2", "INPUT3" and "INPUT4" can
each adjust the image position setting on this page. The same for view modes.
®Even when the image fills the screen, its position can be adjusted with this function.
®Press ENTER to reset the image to original positions.
Press _1/_ to adjust the item to your desired position.
®For resetting all adjustment items to the factory preset values, press A/T to select "Reset", and then press
ENTER.
®Adjustments are stored separately according to input
source.
®You can easily move the image position as shown on this page, but when the power is switched off the image will return to the previously memorized position.
Q
