Useful adjustment settings
Allows you to select what controls the audio output.
Press MENU and the MENU screen displays.
Press _/_ to select "Option".
Press A/Y to select "Output Select", and
then press ENTER.
Press _1/_ to select "Fixed" or "Variable",
and then press ENTER.
Fixed
Variable
- Sound via speaker is adjusted with VOL
+/- on the remote control unit or VOL -/
+ on the TV.
- Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
- Sound via the MONITOR OUTPUT terminal
is adjusted with VOL +/- on the remote
control unk orVOL -/+ on theTV.
- Sound via speaker is muted.
Use Quick Shoot Operation to view fast-action video
more clearly.
Repeat steps 1 and 2 in Output Select.
Press A/Y to select "Quick Shoot", and then
press ENTER.
Press _1/_ to select "On", and then press
ENTER.
®Quick Shoot may cause image noise. If this occurs turn
the function "Off".
Allows you to set a time when the TV automatically
switches to standby.
FA_E
s &PA6oA °E
Press SLEEP.
• Remaining time displays whensleep timer has
been set.
ISleep Timer: Remaining 30 I
Each time you press SLEEP, the remaining
time switches as shown below.
Whenset, the time automatically starts counting
down.
,, If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
Fiveminutes before time expires, the remaining
time displays each minute.
ISleep Timer: Off ]
ISleep Timer: 30 ]
ISleep Timer: 60 ]
ISleep Timer: 90 ]
ISleep Timer: 120 m
Select the optimum color systems to receive. (AUTO,
NTSC, PAL-M, PAL-N)
®Select "Off" by pressing SLEEP to cancel the sleep timer.
®The TV will enter the standby mode when the remaining
time reaches zero.
Repeat steps 1 and 2 in Output Select.
Press ,&/T to select "Color System", and
then press ENTER.
Press A/_' to select a compatible video
signal system of your equipment, and then
press ENTER.
Q "33