Useful adjustment settings
INPUT button
Selecting input source
Use this menu to select the input source.
Press INPUT,
,, A list of seleetable sources appears.
Press INPUT again to select the input source.
• An image from the selected source automatically displays.
You can also select the input source by pressing A/T.
,,If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.
Selecting input signal type
For setting the signal type of external equipment connected to INPUT 1 or 2 terminals.
Press MENU and the MENU screen displays.
Press 41/1_ to select "Option".
Press A/V to select "Input Select", and then press ENTER.
Press A/T to select a signal type you want to set, and then press ENTER.
®Ifthe selected signal type is incorrect, an image does not display or no color image displays.
®If you set INPUT1 and INPUT2 to Auto, the TV will automatically select the input signal.
®Check the operation manual of the external equipment for the signal type.
®Setting INPUT 1 and INPUT 2 signal selection to "Auto" when other equipment is connected will result in the following connectivity priority.
Q
