Connecting external devices
SCART connection
Example of connectable devices
●VCR ● Decoder (only SCART 1)
●DVD player/recorder
SCART 1
(AV / RGB)
●After connection
●If after connecting a PC to the TV through a
HDMI cable, the audio does not run, connect a mini stereo connector of ø 3.5mm between TV and PC as indicated in the previous drawing.
●When a PC is connected to the TV with a DVI cable, it will be necessary to connect a mini stereo connector of ø 3.5mm of the TV to PC as indicated in the previous drawing
SCART cable
Decoder
NOTE
•In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in “Input Source” (Page 10).
Speaker/amplifier connector
Example of connectable devices
●Connecting an amplifier with digital audio input
Connect an amplifier with external speakers as shown below.
DIGITAL
AUDIO
OUTPUT
SPDIF
Audio cable
SPDIF
DIGITAL AUDIO IN
PC connection through HDMI (DVI)
HDMI (DVI) Connection
HDMI 1 or 2
0#
0#
DVI/HDMI Cable
AUDIO IN
HDMI (DVI)
ø 3,5 mm stereo mini jack cable
Amplifier with
digital audio input
●After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio output format compatible with
the programme you are watching or the device connected.
Go to “MENU” > “SOUND” > “SPDIF Mode” > select “PCM” or “Dolby Digital”.
NOTE
•When you set this to “Dolby Digital”, and you receive the Dolby Digital or Dolby Digital Plus audio formats, Dolby Digital audio is output. Otherwise, PCM audio is output.
When you set this to “PCM”, PCM audio is output no matter what audio formats you receive.
15
