Other useful features
Setting when using external devices
Input source settings
For selecting the input type of external equipment
SCART 1: CVBS, RGB
SCART 2: Y/C, CVBS
•If no (colour) image is displayed, try changing to another signal type.
•Check the operations manual of the external equipment for the signal type.
Connecting a USB device
(Media Player)
Connect an USB device to the TV as shown below.
•Depending on the USB device, the TV may not be able to recognise the contained data.
•Use only alphanumeric characters for naming files.
•File names over 80 characters (may vary depending on character set) may not be displayed.
•Do not disconnect a USB device or memory card from the TV while transferring files, using the slide show function, when a screen is switching to another or before you exit “MEDIA PLAYER” from the “INPUT SOURCE” menu.
•Compatibility with USB hard disc connection.
•Do not connect and disconnect a USB device from the TV repeatedly.
MEDIA PLAYER function
After selecting Media Player, the TV loads USB device files, and shows the following screen:
1 Pressing ◄/► buttons you can change between different modes: PHOTO, MUSIC, MOVIE or TEXT. Press OK to select the option you want to reproduce.
2 Press ▲/▼/◄/► to select the folder where you want to search the files and then press OK.
PHOTO mode
You can reproduce photos with JPG, JPEG and BMP format on your TV.
Several kinds of reproduction are possible.
1 Select PHOTO mode and press OK.
2 Select the file you want to display on full screen with ▲/▼ /◄/► buttons and press OK to start the viewing.
21
