Sharp LC-32LE345X operation manual Trademarks, Attaching the stand, Antenna connection

Trademarks

•“HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.”

•Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

•Products that have earned the ENERGY STAR® are designed to protect the environment through energy effi ciency.

•DivX®, DivX Certifi ed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

•ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an offi cial DivX Certifi ed® device that plays DivX video. Visit divx.com for more information and software tools to convert your fi les into DivX videos.

•ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

1	Confi rm the screws supplied with the TV.
	Screws (m4)
	(used in step 3)		Soft cushion
2	Insert the stand base to the stand post on
	the bottom of the TV. (1)
3	Insert and tighten the 4 screws into the 4	Stand	Screw
	holes on the bottom of the stand base. (2)

NOTE	Screw driver
• To detach the stand, perform the steps in reverse order.

CAUTION

•Do not attach or detach the stand without holding it.

Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.

Antenna connection

Connecting the antenna cable

To enjoy a clearer picture, use an outdoor antenna.

Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable)

Antenna cable

(commercially available)

To antenna terminal

Room antenna terminal (75-ohm type)

CAUTION

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH

THE AC CORD CONNECTED. 3