Useful adjustment settings
Input Label | Sleep Timer |
Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display.
Allows you to set a time when the TV automatically switches to standby.
1Press INPUT to select the desired input source.
2Press MENU to display the MENU screen, and then press c/d to select “Setup”.
3Press a/b to select “Input Label”, and then press ENTER.
4Press a/b/c/d to select the new name for the input mode, and then press ENTER.
Example
INPUT SOURCE
TV
DVD
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
5Press MENU to exit.
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
1Press SLEEP.
•The remaining time displays when the sleep timer has been set.
Sleep Timer: Remaining | 30 |
Each time you press SLEEP, the remaining
2time switches as shown below.
•When set, the time automatically starts counting down.
•If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.
•Five minutes before the time expires, the remaining time displays every minute.
Off 30 60
120 90
NOTE
•Select “Off” by pressing SLEEP to cancel the sleep timer.
•The TV will enter the standby mode when the remaining time reaches zero.
•When the sleep timer is set, its indicator on the TV lights red.
33