Appendix
Troubleshooting
| Problem |
|
|
|
| Possible Solution |
|
|
|
|
|
| |
• | No power |
| • | Check if you pressed TV POWER on the remote control unit. (See page 15.) If the | ||
|
|
|
| indicator on the TV does not light up, press POWER on the TV. | ||
|
|
| • | Is the AC cord disconnected? (See page 7.) | ||
|
|
| • | Has the power been turned on? (See page 15.) | ||
|
|
|
|
|
| |
• | Unit cannot be operated. |
| • | External infl uences such as lightning, static electricity, may cause improper operation. | ||
|
|
|
| In this case, operate the unit after fi rst turning on the power of the TV or unplugging | ||
|
|
|
| the AC cord and replugging it in after 1 or 2 minutes. | ||
|
|
|
|
|
| |
• | Remote control unit does not |
| • | Is the FUNCTION set correctly? Set it to the TV setting position. | ||
| operate. |
| • | Are batteries inserted with polarity (e, f) aligned? (See page 8.) | ||
|
|
| • | Are batteries worn out? (Replace with new batteries.) | ||
|
|
| • Are you using it under strong or fl uorescent lighting? | |||
|
|
| • Is a fl uorescent light illuminated near the remote control sensor? | |||
|
|
|
|
|
| |
• | Picture is cut off/with sidebar |
| • | Is the image position correct? (See page 32.) | ||
| screen. |
| • | Are screen mode adjustments such as picture size made correctly? (See pages 34 | ||
|
|
|
| and 35.) |
|
|
|
|
|
|
|
| |
• | Strange color, light color, or color |
| • | Adjust the picture tone. (See pages 25 to 26.) | ||
| misalignment |
| • | Is the room too bright? The picture may look dark in a room that is too bright. | ||
|
|
| • | Check the input signal setting. (See page 37.) | ||
|
|
|
|
|
| |
• | Power is suddenly turned off. |
| • | Is the sleep timer set? (See page 33.) | ||
|
|
| • | Check the power control settings. (See page 28.) | ||
|
|
| • | The unit's internal temperature has increased. Remove any objects blocking vent or | ||
|
|
|
| clean. |
|
|
|
|
|
|
|
| |
• | No picture |
| • | Is connection to other components correct? (See pages 13 and 14.) | ||
|
|
| • | Is correct input signal source selected after connection? (See page 29.) | ||
|
|
| • | Is the correct input selected? (See page 29.) | ||
|
|
| • | Is picture adjustment correct? (See pages 25 to 26.) | ||
|
|
| • | Is “On” selected in “Audio Only”? (See page 36.) | ||
|
|
| • | Is a | ||
|
|
|
|
|
| |
• | No sound |
| • | Is the volume too low? (See page 18.) | ||
|
|
| • | Is “Variable” selected in “Output Select”? (See page 36.) | ||
|
|
| • | Have you pressed MUTE on the remote control unit? (See page 18.) | ||
|
|
|
| |||
The error message about reception of broadcast |
|
| ||||
|
|
|
|
|
| |
The example of an error message |
|
| Error code |
| Possible Solution | |
| displayed on a screen |
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
• | Failed to receive broadcast. |
|
| E202 | • | Check the antenna cable. Check that the antenna is correctly |
|
|
| setup. | |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
• | No broadcast now. |
|
| E203 | • | Check the broadcast time in the program guide. |
|
|
|
|
|
|
|
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: f4°F to e140°F (f20°C to e60°C)
51