Other viewing options

Freezing images

Allows you to capture and freeze a moving image that you are watching.

1Press FREEZE.

• A moving image is captured.

2Press FREEZE again to cancel the function.

NOTE

•When this function is not available, “No displaying still image available.” will display.

•The still image automatically goes out after 30 minutes.

•If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be cancelled and a V-CHIP BLOCK message will appear.

Presetting remote control function

You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit.

Presetting manufacturer codes

1Press FUNCTION until the LED for your device lights up.

2After the LED for your device lights up, press FUNCTION and DISPLAY at the same time to enter the code registration mode. The LED will blink.

3Press 0–9to enter the manufacturer code. (See page 47.)

•Preset mode is fi nished once the LED no longer lights up.

4After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

46