2
20
15

Simple button operation for

changing volume/sound

NOTE
• Within 30 minutes after pressing e, press one of the
buttons below to cancel the mute.
VOLl/VOLk
e
Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
Watching TV
Changing the volume
You can change the volume on the TV or on the
remote control unit.
To increase the volume, press VOLk.
To decrease the volume, press VOLl.
NOTE
• “TV”, “DTV”, “INPUT1”, “INPUT2” and “INPUT3” modes
can store volume adjustment values separately.
Using Mute (e) on the remote control unit
e mutes the current sound output.

Sleep timer

Allows you to set a time when the TV automatically
switches to standby.
1
Mute
Press e.
• The sound is silenced.
• “M” is displayed while the mute function is on.
Press e again within 30 minutes to cancel the
mute.
• Before 30 minutes, the volume level returns to the
previous setting.
1
2
Sleep Timer: Remain 2 hr. 00 min.

Still image

You can freeze a motion picture on the screen.
NOTE
The sleep timer indicator on the TV lights up when the time
has been set.
When the time has been set, countdown automatically
starts.
Five minutes before the preset of time expires, the
remaining time displays each minute.
Select “Off” by pressing SLEEP to cancel the sleep timer.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.
0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min.
Off
1
2
NOTE
• The still image automatically goes out after 30 minutes.
• When you freeze the picture, an icon is displayed at the
lower left corner of the screen.
Press FREEZE.
Press RETURN to exit still image.
PD5X_en_b.indd 15PD5X_en_b.indd 15 2006/12/22 14:28:402006/12/22 14:28:40