Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Colour System”, and
then press ENTER.
3
Press a/b to select a compatible video signal
system of your equipment, and then press
ENTER.
4
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
41
Useful adjustment settings

Colour system setting

You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
Input source
INPUT 1
INPUT 2
Selectable item
AUTO, COMPONENT, VIDEO
AUTO, COMPONENT, VIDEO

Input Select

Selecting input source
Can use for selecting the input source.
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “Input Select”, and then
press ENTER.
3
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a/b.
2
Selecting input signal type
For setting the signal type of external equipment.
Press TV/VIDEO on the remote control unit or
TV/VIDEO on the TV.
1
Press a/b to select a signal type you want to
set, and then press ENTER.
4
NOTE
If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “AUTO”, the input terminal
where cable is connected is automatically selected.
• When the signal type is set to “AUTO” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1/INPUT 2: COMPONENTs VIDEO
PD5X_en_h.indd 41PD5X_en_h.indd 41 2006/12/22 14:32:442006/12/22 14:32:44