Useful viewing functions
Display information regarding time shift
Channel display
Channel information displays by pressing P on the remote control unit.
Audio (ENG) | STEREO |
Video |
|
Subtitle | Off |
>>New information
The time shift ready icon shows up when READY is pressed and the TV is recording the programme.
The status icon shows up depending on what is shown on the screen.
Counter
The counter displays when you set “On” in “Display the Time shift memory” (Go to “Setup” > “Option” > “Time shift setting”).
Time shift
Memory used:
Option
Auto input selection
You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK or an Euro SCART compatible signal on the TV during time shift operations.
Go to “Menu” > “Setup” > “Option” > “Time shift setting” > “Auto input selection”.
Item
| Release time shift when receiving | |
Enable | an AQUOS LINK or a Euro SCART | |
compatible signal. Switch input source | ||
| ||
| automatically. | |
|
| |
| Time shift continues to work. The | |
Disable | TV does not swich input source | |
automatically even when receiving | ||
| an AQUOS LINK or a Euro SCART | |
| compatible signal. | |
|
|
The grey bar shows how much memory is in use.
This blue point shows how much time has progressed.
“FULL” shows up when the grey bar reaches the right edge. The TV starts overwriting the previously recorded data.
NOTE
•You can also call up the information above by pressing CONTROL on the remote control unit or select “Control (Time shift)” from “Option” > “Option for view”.
36
