Other useful features
Additional features
Option
Colour system
You can change the colour system to one that is compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour system”.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g., “PAL”, “SECAM”).
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/Audio out select”.
| Item | |
Headphone | Output audio through headphones. | |
Audio out | Output audio through an A/V receiver or | |
surround audio controller. | ||
|
Option
Channel selecting effect
This function shows a screen effect when choosing or changing channels.
Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”.
Option
Illumination
This function makes the LED on the front of TV illuminated in several ways.
Go to “Menu” > “Setup” > “Option” > “Illumination”.
| Item | |
Off | The LED is not illuminated. | |
Standby | The LED is illuminated while the TV is in | |
standby mode. | ||
| ||
|
| |
Watch | The LED is illuminated while you watch | |
TV. | ||
| ||
|
| |
Always | The LED is illuminated all the time. |
NOTE
•The factory default for this item is “Watch”. Set to “Off” if you do not want the LED to illuminate.
CAUTION
•This terminal is also used for headhones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing.
NOTE
•If you select “Audio out” when a cable is inserted in the HDMI 2/EXT 3 AUDIO (L/R) terminal, the TV speakers are muted.
•When you select “Audio out”, you can adjust the TV sound volume with the Yl/kbuttons on the TV or I+/- buttons on the remote control unit.
41
