Preparation
Attaching the stand unit
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confirm that there are nine screws (four long screws and five short screws) with the stand unit.
4Insert and tighten four short screws into the four holes on the rear of the TV.
2 Attach the supporting post for the stand unit onto the base using the four long screws with a screwdriver as shown.
Supporting | 5 | Attaching the stand cover. | |
| 1 | Slide the stand cover into the two catches on | |
post |
| ||
|
| the stand base. | |
|
|
| |
|
| 2 | Insert and tighten a short screw into the hole |
|
|
| on the centre of the stand cover. |
3 Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area).
Soft cushion
NOTE
• To detach the stand unit, perform the steps in reverse order.
• A screwdriver is not supplied with this product.
• The stand base is made of glass. Therefore, be careful not to drop the stand base or apply pressure to it.
• Do not place heavy objects on the stand base.
