Sharp LC-52LE830U Watching TV, Turning On/Off the Power Initial Installation, TV Location

Watching TV

Turning On/Off the Power Initial Installation

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.

1. Insert the batteries into the remote control unit. (See page 10.) 2. Connect the antenna cable to the TV. (See page 10.)

3. Plug in the AC cord to the AC outlet. (See page 9.)

POWER

POWER (On/Standby)

Press POWER on the TV or on the remote control unit to turn the power on.

•The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 34.

Press POWER on the TV or on the remote control unit again to turn the power off.

•The TV enters standby and the image on the screen disappears.

•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

•Weak electric power is still consumed even when the TV is turned off.

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

1Press a/b to select the desired language listed on the screen, and then press ENTER.

Language
TV Location	English
Antenna & Cable/STB	Français
Air/Cable
CH Search	Español
Completed

TV Location

Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR in Home mode default setting.

2Press c/d to select "Home" or "Store". Press ENTER to enter the setting.

Select

Home Store

Home: “Power Saving” is set to "Advanced", and AV MODE is set to "STANDARD".

Store: “Power Saving” is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When “On” is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

•ENERGY STAR qualifi cation is based on AV MODE "STANDARD".

18