Using external equipment
NOTE
•IEEE1394 is the IEEE’s international standard.
•i.LINK and the i.LINK logo are registered trademarks of Sony Electronic, Inc.
•A copy protection technology is used on i.LINK devices that incorporate copyright protection. This technology has received the approval of the Digital Transmission Licensing Administrator (DTLA), an organization that administers copyright protection technologies. Some picture and sound data have restrictions on duplication. Such data cannot be digitally copied using the i.LINK. Some picture and sound data may not be able to be sent back and forth between an i.LINK device that has DTLA copyright protection technology and one that does not.
Notes on i.LINK connection of
•Even when a connected i.LINK device is playing, input signal can be switched to input mode other than i.LINK by shifting the cursor to the input selection button and pressing ENTER.
•This TV may not be able to operate some i.LINK devices using the control panel, or to display picture and/or sound input from some i.LINK devices.
•When the TV’s control panel is used to record a program, what is recorded with the i.LINK device are the pictures and sound of the digital program that the TV is receiving.
•The i.LINK control panel cannot be used during timer recording.
•There may be some programs which i.LINK devices cannot record.
•With some i.LINK devices, the quality of the picture may be distorted during fast forwarding or rewinding.
Notes specifically on i.LINK connection of
•Depending on the
•If a
•To record the picture and sound of a digital program which the TV is receiving, use
Notes specifically on i.LINK connection of
•Depending on the
•Depending on the
•If an
•Input mode can be set to automatically switch to i.LINK when an i.LINK device connected to the TV is played.
1 Press MENU to display the MENU screen.
2 Press c/dto select “Digital Setup”, and then press ENTER.
3 Press a/bto select “i.LINK Setup”, and then press ENTER.
4 Press a/bselect “i.LINK Autoswitch”, and then press ENTER.
5 Press c/dto select “Yes”, and then press
ENTER.
i.LINK Autoswitch
Recording Mode
Standby Mode
YesNo
Recording digital programs with a•Before commencing this procedure, the steps in “i.LINK Setup” on page 53 need to be completed beforehand.
•Please also refer to the operation manual of the D- VHS deck to be used with this TV.
1 Select a digital program to be recorded.
2 Press i.LINK to display the i.LINK control panel.
STOP | 05 |
|
00:01:32 | PWR | Model |
| STOP | Input |
Notes specifically on i.LINK connection of
•Depending on the
3 Press a/b/c/dto select E, and then press
ENTER.
•Recording starts.
•Select H and press ENTER to stop recording.
NOTE
•Input mode cannot be switched to i.LINK during recording.
•When a
56