Useful adjustment settings
Input signal (for PC input mode)
•Some input signals may have to be registered manually to display properly.
•The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
640g400720g400
640g480848g480
1024g7681280g768
NOTE
•You can only select the “Input Signal” on the Setup menu when receiving one of the 6 input signals listed above.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
3 Press a/bto select “Input Signal” and then press ENTER.
4 Press a/bto select the desired input signal on the display.
Example
640 x 480
848 x 480
3D Noise Reduction
Produces a clearer video image.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Option”.
3 Press a/bto select “3D Noise Reduction”, and then press ENTER.
4 Press a/bto select the desired level, and then press ENTER.
Off
High
Low
Mosquito Noise Reduction
Reduces fine detail mosquito noise.
1 Repeat steps 1 and 2 in 3D Noise Reduction.
2 Press a/b to select “Mosquito Noise
Reduction”, and then press ENTER.
3 Press a/bto select the desired level, and then press ENTER.
Selected item | Description |
|
|
Off | For normal images |
High | For enhanced Mosquito Noise Reduction |
|
|
Low | For moderate Mosquito Noise Reduction |
|
|
Audio Only
When listening to music from a music program, you can set the Liquid Crystal display off and enjoy audio only.
1 | Repeat steps 1 and 2 in 3D Noise | ||
| Reduction. |
| |
2 | Press a/bto select “Audio Only”, and then | ||
| press ENTER. |
| |
3 | Press c/dto select “On”, and then press | ||
| ENTER. |
| |
|
|
| |
Selected item |
| Description | |
|
|
| |
On |
| Audio is output without screen image. | |
|
|
| |
Off |
| Both screen images and audio are output. | |
|
|
|
|
64