Other viewing options

Viewing information of the program

You can view information about a program you are currently watching.

1

Press INFO while watching a broadcast.

 

• Information of the current program will be

 

displayed.

 

 

PBS WGBH-HD

2.1 American Family – – – Journey of Dreams

 

20:00

21:00

Sample program information

•If the program you are receiving is copy- protected, an icon will be displayed in the program information. Recording digital programs via i.LINK, or recording digital audio via digital audio output terminals, is restricted.

IconDescription

Digital copying prohibited

One digital copy only

NOTE

•Sometimes the name of the program is not broadcast. In that case, the program name will not be displayed.

Picture and still image

You can display two same-sized pictures – one moving and one still.

1

Press FREEZE.

•A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.

FREEZE

2 Update the still image by pressing ENTER.

•Each time you press ENTER, the image on the right screen updates.

3 Press FREEZE to exit still image.

NOTE

•This function does not work in INPUT 4 (HDMI) and INPUT 5 (DVI-I).

•When this function is not available, “No displaying still image available” will display.

•The still image is automatically erased after 30 minutes.

•If you are using freeze function and a broadcast activates the V-CHIP BLOCK, freeze function will be cancelled and a V-CHIP BLOCK message will appear.

Presetting remote control function

You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit.

Presetting manufacturer codes

1 Press FUNCTION until the LED for your device lights up.

2 After the LED for your device lights up, if you press FUNCTION and DISPLAY and enter the code registration mode, the LED will blink.

3 Press 0 – 9 to enter the manufacturer code. (See page 75.)

•Preset mode is finished once the LED no longer lights up.

4 After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

74