Basic Operation (Continued)

Switching the Input Modes (INPUT1/ INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV)

1Turn on the power of the connected video equipment.

2Press INPUT to select the applicable input source. The screen changes in order of INPUT1, INPUT2, INPUT3, INPUT4, INPUT5 (PC) and TV mode each time INPUT is pressed.

INPUT1 mode

I N P U T 1

7 2 0 P

INPUT2 mode

I N P U T 2

INPUT3 mode

I N P U T 3

INPUT4 mode

I N P U T 4

H D M I 7 2 0 P

INPUT5 (PC) mode

I N P U T 5

P C

TV mode

2

A

• INPUT1:

Used for video equipment connected to the COMPONENT input terminals.

• INPUT2:

Used for video equipment connected to the INPUT2 terminals.

The S-video input terminal is additionally provided for the INPUT2 terminal. If both the S-video terminal and normal video terminals are connected with cables, the S-video input terminal takes priority.

• INPUT3/OUTPUT:

INPUT3 mode is used to adjust the preset settings and IN or OUT can be selected. INPUT3 indication is not displayed when OUT is selected. (For details on setting INPUT3 SELECT, see page 26.)

• INPUT4:

Used for video equipment connected to the HDMI input terminal.

• INPUT5:

If you connect the PC to the PC-IN terminals, you can view the PC image on the LCD TV set.

18

Sound Volume

■To adjust the volume

●Press VOL (+) to increase the sound volume. The bar indicator shifts right.

VOLUME

��50

●Press VOL (–)to decrease the sound volume. The bar indicator shifts left.

VOLUME 10

■To mute the sound

●Press MUTE to temporarily turn off the sound.

The MUTE mark is displayed for 4 seconds.

●Press MUTE or VOL (+)/(–)to turn the sound back to the previous level.

The mute function is automatically turned off when any

of the following buttons are pressed: POWER, MUTE, VOL(+)/(–)or MTS.

VOLUME 10

A

•When VOL (+)/(–)is pressed in the Mute mode, the sound turns on and the volume indicator is displayed.

•The Mute function is canceled when POWER is pressed.

■To select MTS (Multichannel TV Sound)

1Press MTS to display the MTS screen.

2Press MTS to select the MTS settings.

STEREO: stereo audio

SAP: secondary audio program

MONO: monophonic audio

STEREO <ON�AIR

SAP <ON�AIR

MONO

A

•“ON AIR” appears when a STEREO or SAP broadcast is being aired.