Useful Features (Continued)

■Activating V-CHIP BLOCK

●Setting STATUS

You can activate V-CHIP BLOCK after setting V-CHIP.

■Changing V-CHIP BLOCK settings

1 Repeat steps 1 to 3 of Setting V-CHIPon page 29, then “INPUT SECRET NO.” will be displayed.

–– – –

1Repeat steps 1 to 4 of Setting V-CHIPon page 29.

2Press '/" to select “STATUS”, and press ENTER.

M P A A

T V G U I D E L I N E S

C A N . E N G L I S H R A T I N G S

C A N . F R E N C H R A T I N G S

S T A T U S

3Press '/" to select “ON”, and press ENTER.

ON

OF F

A

•If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be activated.

4Press MENU to exit.

■Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated

1“V-CHIP HAS BEEN ACTIVATED” appears if you watch a program with the same Program Rating data you configured.

V – C H I P H A S B E E N A C T I V A T E D

T V – 1 4

D L S V

A

•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if “STATUS” is set to “OFF”.

2Input the 4-digit secret number by using Channel Select; the V-CHIP select mode will be displayed. Set the V-CHIP BLOCK again.

M P A A

T V G U I D E L I N E S

C A N . E N G L I S H R A T I N G S

C A N . F R E N C H R A T I N G S

S T A T U S

■Changing or clearing the SECRET NUMBER

If you forget the secret number, clear the secret number as follows.

Upper control panel of the main unit

VOL () CH ()

MENU

1Repeat steps 1 to 3 of Setting V-CHIPon page 29, or 1 and 2 of Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated, then “INPUT SECRET NO.” will be displayed.

2 Press and hold both CH ( ) and VOL (+) on the main unit simultaneously until the message “INPUT SECRET NO.” blinks.

3Press MENU to exit.

2Press MENU to display “INPUT SECRET NO.”.

–– – –

3Input the 4-digit secret number by using Channel Select; V-CHIP BLOCK is temporarily canceled. If you input an incorrect secret number, “SECRET NO. IS INCORRECT.” is displayed. In this case, input the correct secret number.

30