Watching the DVD
Simple operations for watching a DVD.
POWER
POWER indicator
TV/DVD status indicator (POWER)
ON | Lighting (Green) |
|
|
OFF/Standby | Lighting (Red) |
POWER (On/Standby)
TV/DVD
Preparation
Perform the following steps before you press POWER on the remote control unit.
1.Insert the batteries into the remote control unit. (See page 8.)
2.Connect the antenna cable to the TV/DVD. (See page 12.)
3.Plug in the AC cord to the AC outlet. (See page 7.)
Turning on the power
Press POWER on the TV/DVD, or POWER on the remote control.
• POWER indicator (Green): The TV/DVD is on.
Select the DVD mode
Press TV/DVD to select the DVD mode.
Turning off the power
Press POWER on the TV/DVD, or POWER on the remote control.
•The TV/DVD enters standby mode and the image on the screen disappears.
•The POWER indicator on the TV/DVD changes to Red.
NOTE
•If you are not going to use this TV/DVD for a long period of time, be sure to remove the AC cord from the power outlet.
•Weak electric power is still consumed even when POWER is turned off.
•If a station being viewed stops broadcasting, the TV/DVD will automatically shut itself off after 15 minutes. (TV mode only.)
29