Watching the DVD

Playback procedure

Place the disc in the

1 disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching its surface, align it with the guides, and place it in position.

2

On the screen, “ ” changes to “Reading”

and then playback will commence.

• A menu screen appear on the TV screen, if the disc has a menu feature. In this case, press /

/ / or ENTER to operate a menu feature.

 

 

Reading

 

 

 

 

 

3

Press STOP to end playback.

• The unit memorizes the stopped point,

 

 

depending on the disc. “

 

” appears on the

 

 

 

 

screen. Press PLAY to

 

resume playback (from

 

 

the scene point).

•If you press STOP again (“ ” appears on the screen) or unload the disc, the TV/DVD will clear the stopped point.

4

Press EJECT.

Remove the disc and then press POWER.

The TV/DVD turns off.

When you eject the disc, you may hear mechanism noise, but it is not malfunction.

NOTE

Status display of disc

Press DISPLAY. The status display of the disc will appear on the screen in order like the figure below.

DVD

Title elapsed playing time

PlayTitle total

status

time

Title

 

 

 

Chapter No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T

 

C

 

 

 

 

 

number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subtitle language Type of audio

 

 

 

 

 

 

 

 

 

 

Camera

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

angle

 

 

 

 

 

 

 

 

Audio language

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display Off

Audio CD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track elapsed playing time

Disc

 

 

 

 

 

 

 

 

 

Track

 

 

 

 

 

 

 

 

 

operation

 

 

 

 

 

 

 

 

 

Track

 

 

T

 

 

 

 

 

 

total time

number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•When you play a CD disc, the status display will appear and remain on the screen.

NOTE

If the TV/DVD does not operate properly:

Static electricity, etc., may affect the player’s operation. Disconnect the AC power cord once, then connect it again.

•If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 5 and 41).

•Some discs may take a minute or so to start playback.

•When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY.

•A “Prohibition” symbol “ ” may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.

•When you set a single-faced disc label downwards (i.e. the wrong way up) “Reading” will appear on the display and then “Incorrect Disc” will be displayed.

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV/DVD plays DVDs according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

30