Sharp LC 20DV20U Temporary disabling of rating level by DVD disc

Function setup

Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.

1	Load a DVD disc. (See page 30.)
2	If the DVD disc has been designed to
	temporarily cancel the rating level, the
	screen which follows the “Reading” screen
	will change, depending on which disc is
	played. If you select “YES” with pressing
	ENTER, “Your disc exceeds the parental
	control level 1.” (e.g.) screen will then
	appear.
			Your disc exceeds
			the parental control level 1.
			Parental Control Level
			Cancel Picture
				/Enter/Return
3
	If you wish to cancel the set rating level
	temporarily, select “Parental Control Level”
	with			/ , then press ENTER. If the 4-digits
	password at step 5 on page 41 has been
	set, the password entering screen will
	appear as shown in step 4 below.
	Alternatively, if the password has not been
	set, playback will commence. If you don’t
	know (or have forgotten) the password,
	select “Cancel Picture”.
	The setting screen will disappear. Press
	EJECT to remove the disc.
4	Enter the password with Number buttons
	(0-9).
	Then press ENTER.
	• If you interrupt the entering, press RETURN.
			Please enter the
		4		digit password
			Enter/0-9/Cancel/Return
5	Playback will commence if the entered
	password was correct.

NOTE

•This temporary cancellation of the rating level will be kept until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

42