Sharp LC 20S5U Controls, Listening with Headphones, MENU, POWER, CH ( ), ) INPUT, VOL ( ), Speaker, Control) sensor, Headphone jack ( ), Upper control panel

Part Names of the Main Unit

Controls

How to adjust the angle

Upper control panel

	CH ( )/(		) INPUT
VOL ( )/(		)	MENU	POWER

	Tilt the display by grabbing onto the
	carrying handle while securely holding
	down the stand with your other hand.
	To change the vertical angle of the LCD TV
Speaker	set, tilt the screen up to 2.5 degrees forward
	or 10 degrees backward. Please adjust

the angle so that the LCD TV set can be watched most comfortably.

		Headphone jack ( )
		Plug the headphone mini-plug into the headphone jack located
		on the front of the main unit.
		OPC (Optical Picture Control) indicator
OPC (Optical Picture
		The OPC indicator lights up green when "OPC" is set to "ON".
Control) sensor
Remote sensor		(See page 20.)
	POWER/WAKE UP TIMER indicator
	POWER/WAKE UP TIMER indicator lights up green when the power is on,
	and red when in the standby mode (the indicator will not light when the main
	power is off), and orange when the wake up timer is set (the indicator will
	light when in the standby mode).

A

• INPUT, CH ( )/( ), VOL (–)/(+)and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.

Listening with Headphones

■Plug the headphone mini-plug into the headphone jack located on the front of the main unit.

▼On-screen display

	VOLUME
Headphones	10
	Adjust the sound volume using VOL (+)/(–)on the
	remote control.

A

•Headphones are not included in the supplied accessories.

•No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.

•Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

10