Useful Features (Continued)

■Activating V-CHIP BLOCK

●Setting STATUS

You can activate V-CHIP BLOCK after setting V-CHIP.

■Changing V-CHIP BLOCK settings

1 Repeat steps 1 to 3 of Setting V-CHIPon page 28, then “INPUT SECRET NO.” will be displayed.

–– – –

1Repeat steps 1 to 4 of Setting V-CHIPon page 28.

2Press '/" to select “STATUS”, and press ENTER.

M P A A

T V G U I D E L I N E S

C A N . E N G L I S H R A T I N G S

C A N . F R E N C H R A T I N G S

S T A T U S

3Press '/" to select “ON”, and press ENTER.

ON

OF F

A

•If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be activated.

4Press MENU to exit.

■Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated

1“V-CHIP HAS BEEN ACTIVATED” appears if you watch a program with the same Program Rating data you configured.

V – C H I P H A S B E E N A C T I V A T E D

T V – 1 4

D L S V

A

•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if “STATUS” is set to “OFF”.

2Press MENU to display “INPUT SECRET NO.”.

–– – –

2Input the 4-digit secret number by using Channel Select; the V-CHIP select mode will be displayed. Set the V-CHIP BLOCK again.

M P A A

T V G U I D E L I N E S

C A N . E N G L I S H R A T I N G S

C A N . F R E N C H R A T I N G S

S T A T U S

■Changing or clearing the SECRET NUMBER

If you forget the secret number, clear the secret number as follows.

Upper control panel of the main unit

VOL ( ) CH ()

MENU

1Repeat steps 1 to 3 of Setting V-CHIPon page 28, or 1 and 2 of Canceling the V-CHIP BLOCK screen while V-CHIP BLOCK is activated, then “INPUT SECRET NO.” will be displayed.

2 Press and hold both CH ( ) and VOL (+) on the main unit simultaneously until the message “INPUT SECRET NO.” blinks.

3Press MENU to exit.

3Input the 4-digit secret number by using Channel Select; V-CHIP BLOCK is temporarily canceled. If you input an incorrect secret number, “SECRET NO. IS INCORRECT.” is displayed. In this case, input the correct secret number.

29