EZ SETUP (With AUTO CLOCK Setting)

EZ SETUP during the First Power On

■When you turn on the LCD TV set for the first time, it will automatically memorize the broadcasting channels and clock.

Please perform the following instructions before you press

POWER.

(1)Insert the batteries into the remote control. (See page 7.)

(2)Connect the antenna cable to the LCD TV set. (See page 8.)

(3)Connect the AC cord to the AC INPUT terminal of the LCD TV set and plug in the AC cord to the wall outlet. (See page 9.)

POWER

1Press POWER on the upper side of the main unit, to turn on the TV. The SELECT LANGUAGE screen will be displayed.

Press '/" to select “ENGLISH”, “ESPAÑOL” (Spanish) or “FRANÇAIS” (French).

E N G L I S H

E S P A Ñ O L

F R A N Ç A I S

2Press ENTER to access CH SEARCH mode.

Press '/" to select “ON” or “OFF”. When you select “ON”, the LCD TV set will automatically memorize the broadcasting channels.

ON

OF F

A

• If you select “OFF”, EZ SETUP will be canceled.

3Press ENTER to access AUTO CLOCK mode. Press '/" to select “ON” or “OFF”.

When you select “ON”, the LCD TV set will automatically adjust the clock to search time-signals (EDS signals), which are provided by some TV stations. The AUTO CLOCK setting may take from several minutes to an hour depending on the number of channels to receive and signal status. If you know the channel of the EDS signal carrier (PBS or other) in your area, select “OFF” and follow the procedure in AUTO CLOCK Setting. (See page 15.)

ON

OF F

4Press ENTER to access START EZ SETUP mode. Press '/" to select “YES”, and press ENTER.

A

•If you want to stop the EZ SETUP process once it has started, press MENU and it will be canceled. If you want to set up again, please refer to CH SETUP on page 24.

Y E S

N O

C O N N E C T A N T E N N A

O R C A B L E .

The tuner will automatically search for the broadcasting and cable TV channels. (The channel number will automatically increase when it appears.)

� P L E A S E � W A I T � � � � �

� �

�A U T O � P R O G R A M M I N G

��

�� � � �

��

�� �

��

The LCD TV set will automatically switch to searching for EDS signals.

If EDS signals are received, the channel number and time will be displayed, and then the screen shown in step 5 appears.

�

� P L E A S E � W A I T � � � � �

� �

� N O W � S E A R C H I N G � T I M E �

� �

� � � � �

� �

� � �

� �

5Once EZ SETUP is completed, the lowest channel number memorized will be displayed.

2

S T E R E O

S A P

M O N O � � � � � � � � � � � � � � � � � � � 1 1 : 5 3 A M

A

•Do not let the EZ SETUP screen remain unattended for a long time.

•If EZ SETUP does not memorize all the channels in your region, please refer to page 24 for more information on manually memorizing the channels using CH SETUP.

•It may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occurring around the area. Please refer to page 24 for more information on manually memorizing channels using

CH SETUP.

•If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK setting may not operate. In this case, the “EDS CH IS NOT AVAILABLE.” message will appear and the mode will change to MANUAL CLOCK setting. Refer to page 15 to set the clock manually.

14