Troubleshooting
■Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
| Problem | Check item | Reference page | ||
|
|
| • Make sure the AC cord is properly inserted in the power | 9 | |
Sound | Picture | There is no | outlet. | – | |
|
| • Reception other than those of broadcasting stations can | |||
|
| picture or | be considered. |
| |
|
| sound. | • Make sure the input mode is set to TV. | 17 | |
|
|
| |||
|
|
| • Make sure the POWER switch of the main unit is on. | 16 | |
|
| There is no | • Make sure the BRIGHTNESS is properly adjusted. | 21 | |
| Picture | • Fluorescent lamp may have reached the end of service | 36 | ||
| picture. | ||||
|
| life. |
| ||
|
| There is no | 13 | ||
|
| • Make sure the | |||
|
| picture from | |||
|
| INPUT1/2/3. | • Make sure the AUDIO ONLY is not set to ON. | 32 | |
|
|
| • Make sure the volume is not set to minimum. | 17 | |
|
| There is no | • Make sure the sound is not set to mute. | 17 | |
|
| • Make sure that headphones are not connected. | 10 | ||
|
| sound. |
|
| |
|
| There is no | • Make sure the antenna cable is properly connected. | 8, 9 | |
|
| • Bad reception could be the problem. | – | ||
|
| picture or |
|
| |
|
| sound, just |
|
| |
|
| noise. |
|
| |
|
|
| • Make sure the antenna cable is properly connected. | 8, 9 | |
|
| Picture is not | • Bad reception could be the problem. | – | |
|
|
|
| ||
|
| clear. |
|
| |
|
|
| • Check color adjustment. | 21, 22 | |
|
| Picture is light | • Check COLOR SYSTEM setting. | 25 | |
|
| or improperly |
|
| |
|
| tinted. |
|
| |
|
|
| • Press the BACKLIGHT button or set the BACKLIGHT or | 21 | |
|
| The picture is | BRIGHTNESS settings. | 21 | |
|
| • Check CONTRAST and BRIGHTNESS adjustment. | |||
|
| too dark. | • Fluorescent lamp may have reached the end of service | 36 | |
|
|
| |||
|
|
| life. |
| |
|
|
| • Check the batteries of the remote control. | 7 | |
Remote control does not work. | • Make sure the remote sensor window is not in strong | 7 | |||
|
|
| lighting. |
| |
|
|
| • The broadcasted EDS signal may be weak. Check the | – | |
The clock (AUTO CLOCK) cannot | antenna. | 14, 15, 24 | |||
• Carry out EZ SETUP or Setting the CLOCK again. | |||||
be set. |
|
| |||
|
| • If EDS signal is not sent, set the clock using MANUAL | 15 | ||
|
|
| |||
|
|
| CLOCK Setting. |
| |
|
|
| • External influences such as lightning, static electricity, | – | |
Unit cannot be operated. | etc., may cause improper operation. In this case, |
| |||
operate the unit after first turning the power off, or |
| ||||
|
|
| unplugging the AC cord and |
| |
|
|
| minutes. |
| |
35