Preparation

Setting the System

After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables.

1 Removing the terminal coverDisplay (rear view)

Press the two hooks toward the center of the Display and remove the cover toward you.

Press down the two upper hooks to remove the cover toward you.2 Connecting the system cable and the AC cord to the Display

DISPLAY INPUT1DISPLAY INPUT2

 

(WHITE)

(GRAY)

 

Connect the plug into

Connect the plug firmly

AC cord

the terminal and secure System cable

until the hooks on both

 

it by tightening the

sides click.

thumb screws.

3 Connecting the system cable and the AC cord to the AVC System
AVC System (rear view)

CAUTION

System cable

(GRAY) (WHITE)

AC cord

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE

10

AC CORD CONNECTED.