Sharp LC 37HV4U Connecting external speakers

Useful adjustment settings

Rear view

	How to connect the speaker cable
	1 Pull up the lid.
	2 Insert the edge of the
RED BLACKBLACK RED	cable.

3 Put the lid back down.

• Bundle the cables of the external speakers with clamps as shown above.

	When using external speakers	CAUTION
	• Change the speaker setting to external speakers. (See	• Make sure external speakers have 8 ohm and 10 watt
	page 57.)	• Make sure external speakers have 8 ohm and 10 watt
	page 57.)	specifications.
		specifications.
	Make sure to connect the speaker jack and cable	• Connect the plus/minus jacks with the correct cables.
	Make sure to connect the speaker jack and cable	Incorrect connection may cause a short.
	polarity (L, +) properly	Incorrect connection may cause a short.
	polarity (L, +) properly

•The speaker jacks have plus (L) and minus (+) polarity.

•Plus is red and minus is black.

•The cables are also divided into plus and minus.

•When connecting the left/right speakers, be sure to connect the plus/minus jacks with the correct cables.

NOTE

•See page 11 for bundling the cables of the external speakers.

•Unplug the AC cord from the AC outlet before installing the speakers.