Preparation
Attaching the speakers
The supplied speaker unit can be attached to or detached from the Display. It must be attached unless you use external amplifier/speakers.
Before attaching (or detaching) speakers, unplug the AC cord from the AC outlet.
Be sure to attach or detach the speakers with two or more people.
Example: Attaching right speaker.1
Speaker plug
Insert the speaker plug into the terminal on the Display.
•Make sure that the speaker plug is inserted completely.
2
Hole
Hole
Bulge Bulge
Take hold of the speaker and slowly slide it to the Display.
•Make sure that the two bulges of the speaker align with the holes on the Display.
3
Fasten the screws to secure the speaker in place.
•Use a screwdriver.
•Perform the same steps for attaching left speaker.
CAUTION
•The speaker terminals on the Display are only for the supplied speaker unit. Do not connect any third party plug to the terminal or speaker to the Display.
•Do not handle or move the Display by the speakers.
NOTE
•Perform the same steps for both left and right speakers.
•To detach the speakers, perform the above steps in reverse order.
•You can connect your own amplifier/speakers to the Display. See page 56 for connecting external speakers.
8