Sharp LC 37HV4U AVC System, Rear view, Part names, Front view

Part names

AVC System	PC INPUT terminal (AUDIO)		Headphone
Front view			(When connecting headphones, the sound from the
		PC INPUT terminal (ANALOG RGB)	speakers is muted.)

How to open the door.

STANDBY/ON indicator		INPUT 4 terminals (AUDIO L/R)
		INPUT 4 terminal (VIDEO)
MAIN POWER button	CLEAR*
		INPUT 4 terminal (S-VIDEO)

*If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object. This will reset the System as shown below.

•AV MODE resets to USER

•TV channel returns to initial channel setting (Air:2ch, Cable:1 or 2ch)

•Twin picture resets to normal

•Audio setting initializes

•SRS resets to off

•Image position initializes

NOTE

•Pressing CLEAR will not work if the System is in standby mode (indicator lights red).

•Pressing CLEAR will not delete channel preset or secret number. See page 61 for clearing the secret number when you know it. See page 83 for initializing to the factory preset values when you forget your secret number.

Rear view			DC OUTPUT terminal
		(Terminal for expanded functionality in				DISPLAY OUTPUT 2 terminal
				the near future.)
	Antenna (A) input terminal		DVI-DIGITAL		RS-232C		DISPLAY OUTPUT 1 terminal
Antenna (A) output
		Antenna (B)	INPUT		terminal			AC INPUT terminal
terminal		input terminal	terminal

INPUT 2 terminal (VIDEO)

INPUT 1 terminal (S-VIDEO)

INPUT 1 COMPONENT video terminals (Y, PB, PR)

INPUT 1 terminal (VIDEO)

INPUT 1 terminals (AUDIO L/R)

INPUT 2 terminals (AUDIO L/R)

INPUT 3 COMPONENT video terminals (Y, PB, PR)

INPUT 3 terminals (AUDIO L/R)

INPUT 3 terminal (S-VIDEO)

INPUT 3 terminal (VIDEO)

MONITOR OUTPUT terminal (S-VIDEO)

MONITOR OUTPUT terminal (VIDEO)

INPUT 2 terminal (S-VIDEO)MONITOR OUTPUT terminals (AUDIO L/R)

15