Sharp LC 37SH20U EZ Setup, Channel Setup, Basic adjustment settings

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language setting

Select from among 3 languages: English, French and Spanish.

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

Press a/b to select “EZ Setup”, and then

3press ENTER.

•If you already set the Secret No., go to step 4. If not, skip to step 5.

4Input the 4-digit secret number by using 0–9.

Press a/b to select the desired language

5listed on the screen, and then press ENTER.

Antenna setting

Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.

6Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

	7	Press c/d to select “Yes” for AIR Analog &
	7	Digital, then press b to move down.
		Digital, then press b to move down.
		Press c/d to select “Yes” or “No” for
		CABLE Analog, then press b to move down.
		Press c/d to select “Yes” or “No” for
		CABLE Analog & Digital, then press b to
		move down.
		Select “Search Start”, and then press
		ENTER.
		• If you are only receiving an analog signal through
		the cable, select “Yes” for CABLE Analog. If you
		are receiving both an analog signal and a digital
		signal through the cable, select “Yes” for CABLE
		Analog & Digital.

8Press MENU to exit.

NOTE

•If no channel is found, conﬁ rm the type of connection made with your TV and try EZ Setup again.

Channel Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Antenna setting

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

Press a/b to select “CH Setup”, and then

3press ENTER.

•If you already set the Secret No., input the

4-digit secret number here. See page 38 for setting a secret number.

Press a/b to select “Air/Cable”, and then

4press ENTER.

5Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.

6Press MENU to exit.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

Repeat steps 1 to 3 in Antenna setting in

1Channel Setup.

Press a/b to select “CH Search”, and then

2press ENTER.

Press c/d to select “Yes” for AIR Analog &

3Digital, then press b to move down.

Press c/d to select “Yes” or “No” for CABLE Analog, then press b to move down.

Press c/d to select “Yes” or “No” for CABLE Analog & Digital, then press b to move down.

Select “Search Start”, and then press

ENTER.

•If you are only receiving an analog signal through the cable, select “Yes” for CABLE Analog. If you are receiving both an analog signal and a digital signal through the cable, select “Yes” for CABLE Analog & Digital.

4Press MENU to exit.

NOTE

•If no channel is found, conﬁ rm the type of connection made with your TV and try channel search again.