Useful adjustment settings

Reset

Input Select

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Setup”.

Press a/b to select “Reset”, and then press

3ENTER.

•If you already set the Secret No., input the 4-digit secret number here. See page 38 for setting a secret number.

•“Return to the factory preset values” displays on the screen.

Selecting input source

Use this menu to select the input source.

1Press INPUT.

• A list of selectable sources appears.

4Press c/d to select “Yes”, and then press

ENTER.

•“Now, TV will restart automatically. OK?” displays on the screen.

Press c/d to select “Yes”, and then press

5 ENTER.

• “Now Initializing” displays on the screen and blinks.

• After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

Now initializing

NOTE

•The AV MODE will be set to “STANDARD”.

•The Channel Setup settings will not be changed.

•The Language settings will not be changed.

•The Secret number settings will not be changed.

Press INPUT again to select the input

2source.

•An image from the selected source automatically displays.

•You can also select the input source by pressing a/b.

•If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

Selecting input signal type

For setting the signal type of external equipment connected to INPUT 1 terminal.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

Press a/b to select “Input Select”, and then

3press ENTER.

4Press a/b to select the signal type you want to set, and then press ENTER.

•If the selected signal type is incorrect, images are not displayed or displayed without any color.

5Press MENU to exit.

NOTE

•If you set INPUT 1 to Auto, the TV will automatically select the input signal.

•Check the operation manual of the external equipment for the signal type.

•Setting INPUT 1 signal selection to “Auto” when other equipment is connected will result in the following connection priority.

INPUT 1

1. COMPONENT VIDEO

2. VIDEO

31