Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit (g1) | “AA” size battery (g2) | AC cord (g1) |
Page 8 |
| Page 8 | Page 7 |
|
|
|
|
Cable Clamp (g1) | Cable tie (g1) | Stand unit (g1) | Operation manual (g1) |
|
|
|
|
Page 7 | Page 7 | Page 6 |
NOTE
• Always use the AC cord supplied with the TV.
QUICK REFERENCE
Attaching the stand
•Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•The “REAR” label should be visible from the back of the TV. Refer to the figure.
•Incorrect installation of the stand may result in the TV falling over.
•Be sure to follow the instructions.
REAR
This side faces the rear.
1.Confi rm the 8 screws supplied with the TV.
Short screws (m4) | Long screws (m4) |
(used in step 2) | (used in step 3) |
2.Attach the two parts of the stand unit to each other using the 4 short screws and the hex key (supplied with the product) as shown.
Short screw
3.
1Insert the stand into the opening on the bottom of the TV.
2Insert and tighten the 4 long screws into the 4 holes on the rear of the TV.
Hex key
2
Long screw
Soft cushion 
NOTE
Hex key
1
• To detach the stand, perform the steps in reverse order.
6