Basic adjustment settings
Channel memory setting
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
3press ENTER.
•If you already set the Secret No., input the
Press a/b to select “CH Memory”, and then
4press ENTER.
Press a/b to select ANALOG (Air), ANALOG
5(Cable), DIGITAL (Air) or DIGITAL (Cable), and then press ENTER.
6When viewing ANALOG broadcasts:
1Press c/d to select the channel to skip, and then press b to move down.
2Press c/d to select “On”, and then press
ENTER.
When viewing DIGITAL broadcasts:
1Press a/b to select the channel to skip, and then press c/d to select “On”.
•On: Skips channels. (Channel selection disabled using CH r/s.)
•Off: Does not skip channels. (Channel selection enabled using CH r/s.)
7Press MENU to exit.
NOTE
• Make sure what kind of connection is made with your TV.
Press a/b to select “Antenna Setup -
3DIGITAL”, and then press ENTER.
4Press a/b to select “Signal Strength”.
•The signal strength of the DIGITAL (Air) antenna is displayed. The signal information is based on the current channel.
Signal Strength
Channel Strength
Signal Strength
Current | 0 | Max | 0 |
|
|
|
|
5Press MENU to exit.
Channel Strength
The channel signal strength can also be checked separately.
1 | Repeat steps 1 to 3 in Signal Strength in |
Antenna Setup - DIGITAL |
Press a/b to select “Channel Strength”,
2and then press ENTER.
Input the
3the signal strength of the selected channel.
•Make sure the signal is strong enough for each channel.
Signal Strength |
|
| 1 |
| 2 CH | ||||
Channel Strength |
|
|
| ||||||
|
| Signal Strength |
|
|
|
|
| ||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
| Current 0 |
|
|
| Max 0 | ||||
|
|
|
|
|
|
|
|
| |
Antenna Setup - DIGITAL
In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the “Antenna Setup - DIGITAL” screen.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Signal Strength
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
4Press MENU to exit.
NOTE
• This function is available for DIGITAL (Air) only.
21