Sharp LL-T15S1 operation manual Specifications, Connector pin

Specifications

Signal timings

Display mode		Hsync (kHz)	Vsync (Hz)	Dot frequency
				(MHz)
		31.5kHz	60Hz	25.175MHz
	640x480	37.9kHz	72Hz	31.5MHz
		37.5kHz	75Hz	31.5MHz
VESA		35.1kHz	56Hz	36.0MHz
	800x600	37.9kHz	60Hz	40.0MHz
		48.1kHz	72Hz	50.0MHz
		46.9kHz	75Hz	49.5MHz
		48.4kHz	60Hz	65.0MHz
	1024x768	56.5kHz	70Hz	75.0MHz
		60.0kHz	75Hz	78.75MHz
US text	720x400	31.5kHz	70Hz	28.3MHz
Power Macintosh	640x480	35.0kHz	66.7Hz	30.5MHz
series	832x624	49.7kHz	74.6Hz	57.3MHz
	1024x768	60.2kHz	75Hz	80.0MHz

Notes:

-All are compliant only with non-interlaced.

-Frequencies for Power Macintosh are reference values.

-If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. Follow your computer's instruction manual to set the timing to be compatible with the monitor.

-If the monitor is not receiving any signal (synch signal), [NO SIGNAL] will appear.

The connector pin

	Number	Function
	1	Red video signal input
	2	Green video signal input
	3	Blue video signal input
Mini D-sub connector with 15 pins	4	N.C.
	5	N.C.
	6	For red video signal GND
	7	For green video signal GND
	8	For blue video signal GND
	9	DDC + 5V
	10	N.C.
	11	GND
	12	DDC data
	13	For H-sync signal input
	14	For V-sync signal input
	15	DDC clock

22