Sharp LL-T15S1 Connecting the monitor and turning the monitor on and off, Turning the power on

Connecting the monitor and turning the monitor on and off

English

Turning the power on

1.Turn on the computer.

2.Press the monitor's power button.

The power LED will be lit green, and the screen will display an image.

Power LED Power button

Note:

-When setting up this monitor for the first time or after having changed an aspect of the current system, perform an automatic screen adjustment before use (p. 15).

Turning the power off

1.Turn the computer off.

2.Press the monitor's power button. The Power LED will disappear.

Installing set-up information

Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, command names and methods may differ. Please follow the computer’s own operation manual while reading this.)

For Windows95

Installing monitor set-up information into Windows95. This explanation assumes that the floppy disk drive is "A drive".

1.Place the Utility Disk (provided) into the computer's A drive.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced Properties], and [Monitor], then [Change].

5.Click on [Have disk], confirm that [Copy manufactur- er's files from:] is [A:] then click [OK].

6.Confirm that the monitor details are selected, and click [OK].

7.Check that the monitor details are displayed, then click [Apply].

8.Click [OK], and close the window.

9.Remove the Utility Disk from the A drive.

For Windows98

Installing monitor set-up information into Windows98. This explanation assumes that the floppy disk drive is "A drive".

If the "Add new Hardware Wizard" has appeared:

1.Place the Utility Disk (provided) into the computer's A drive.

2.Click [Next].

3.Check [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

4.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:], and click [OK].

5.Confirm that the monitor details are selected, then click [Next], [Next], and [Finish]. If the "Add New Hardware Wizard" appears, repeat the installation commands beginning from 2 above.

6.Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:

1.Place the Utility Disk in the computer's A drive.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced] and [Monitor].

5.In [Options], check [Automatically detect Plug & Play monitors] and click on [Change].

6.Click [Next].

7.Click on [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].

8.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [A:], and click [OK].

9.Confirm that the monitor details are selected, then click [Next], [Next], and [Finish].

10.Check that the monitor details are displayed, then click [Apply].

11.Click [OK], and close the window.

12.Remove the Utility Disk from the A drive.

13