Sharp MD-MT80H „To create your own track numbers, „Recording tracks as a single track

Models: MD-MT80H

1 48
Download 48 pages 39.75 Kb
Page 21
Image 21
„To create your own track numbers

To create your own track numbers

You can create your own track numbers at any point.

Whilst recording, press the REC button at the point where you want to create track numbers.

The track number will be increased by one.

One track number will be added every time the REC but- ton is pressed.

Recording tracks as a single track

You can record several pieces of music as a single track by disabling the auto marker function.

When a recording is paused or whilst recording...

Press the EDIT button.

Note:

When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automati- cally regardless of the setting of the auto marker function.

To prevent recorded MiniDiscs from

being erased accidentally

Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indicated by the arrow.

The MiniDisc will then be protected against accidental erasure.

To add a recording to such a MiniDisc, slide the acciden- tal erase prevention tab back to its original position.

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be possible to remove it.

zIf the label peels off or partially lifts away, replace it with a new one.

zDo not put a new label on top of an ex-

isting one.

z Attach the label only in the specified location.

Useful Features -Advanced Recording-

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

21

Page 21
Image 21
Sharp MD-MT80H „To create your own track numbers, „Recording tracks as a single track, „To prevent recorded MiniDiscs from