References | Troubleshooting- |
| - |
|
|
44
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
PROBLEM | CAUSE |
|
|
The unit does not turn on. | z Is the AC adaptor disconnected? |
| z Is the battery exhausted? |
| z Is the unit in the hold mode? |
| z Has condensation formed inside the unit? |
| z Is the unit being influenced by mechanical shock or by static electricity? |
|
|
No sound is heard from the ear- | z Is the volume set too low? |
phones. | z Is the earphones plugged in? |
| |
| z Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music? |
|
|
When the operation buttons are | z Is the unit in the hold mode? |
pressed, the unit does not respond. | z Is the battery exhausted? |
| z Is the earphones plug inserted firmly? |
|
|
Some sounds are skipped. | z Is the battery exhausted? |
| z Is the unit being subjected to excessive vibration? |
|
|
The MiniDisc cannot be ejected. | z Has the track number or character information been written on the disc yet? |
| z Is the unit in the recording or editing mode? |
|
|
Recording and editing are impossi- | z Is the MiniDisc protected against accidental erasure? |
ble. | z Is the unit connected properly to the other equipment? |
|
z Is the AC adaptor unplugged or did a power failure occur whilst recording or editing? z Is the unit in the hold mode?
z Is an optical signal being output from the stereo system? Read the operation manual for the stereo system.