Sharp MD-MT80H operation manual Advanced Features, Titlinga MiniDisc, Master MiniDisc operation

Models: MD-MT80H

1 48
Download 48 pages 39.75 Kb
Page 35
Image 35
Master MiniDisc operation

Master MiniDisc operation

1 Insert a Master MiniDisc.

Do not mistake the Master MiniDisc for the target one.

2 Whilst in the stop mode, press the EDIT button to select "NAME STAMP".

3 Press the ENTER/SYNC button.

To cancel the operation, press the Manual background/:OFF button.

4 Press the ENTER/SYNC button.

5 When the unit displays "CHANGE MD", re- move the master MiniDisc.

Remove it without turning off the power. Or, the op- eration will be cancelled.

Operation of the MiniDisc for stamping

6 Load a MiniDisc for stamping.

7 Press the ENTER/SYNC button.

The unit will finish recording the character informa- tion and enter the stop mode.

Note:

If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display "Can'tSTAMP" and turn off the power.

If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation.

Advanced Features

-Titling a MiniDisc-

 

 

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

35

Page 35
Image 35
Sharp MD-MT80H operation manual Advanced Features, Titlinga MiniDisc, Master MiniDisc operation