Sharp MXM453N, MXM283N, MXM363N, MXM503N manual Supports Not Applicable

Criteria

(c)Where a product utilizes touchscreens or contact- sensitive controls, an input method shall be provided that complies with §1194.23 (k) (1) through (4).

k)Products which have mechanically operated controls or keys, shall comply with the following:

k-(1) Controls and keys shall be tactilely discernible without activating the controls or keys.

k-(2) Controls and keys shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls and keys shall be 5 lbs. (22.2 N) maximum.

k-(3) If key repeat is supported, the controls, an input method shall be delay before repeat shall be adjustable.

k-(4) The status of all locking or toggle controls or keys shall be visually discernible, and discernable through touch or sound.

(d)When biometric forms of user identification or control are used, an alternative form of identification or activation, which does not require the user to possess particular biological characteristics, shall also be provided.

(e)When products provide auditory output, the audio signal shall be provided at a standard signal level through an industry standard connector that will allow for private listening. The product must provide the ability to interrupt, pause, and restart the audio at anytime.

(f)When products deliver voice output in a public area, incremental volume control shall be provided with output amplification up to a level of at least 65 dB. Where the ambient noise level of the environment is above 45 dB, a volume gain of at least 20 dB above the ambient level shall be user selectable. A function shall be provided to automatically reset the volume to

Supporting Features

Supports

Supports

Supports

Supports

Supports

Not Applicable

Not Applicable

Not Applicable

Remarks and explanations

The alternate method is setting machine by PC keyboard using Web page. Web page can be read out loud by read out software on PC. Also remote operation function can be used to execute regular jobs from computers.

[For Operation Panel]

(1)Major keys are recognized not only by vision but also by other senses.

(2)Frequent used keys are aligned to be recognized easily and different shapes and colors are used for the keys so as to be distinguished easier.

[For Whole System]

(1)The force required to activate controls and keys is 22.2N or lower.

(2)Controls and keys can be operated with one hand and do not require tight grasping, or twisting of the wrist.

[For Input through key]

(3)Upper side of each key is concaved to be fitted on end-users' fingertip.

[For Input through key]

Key repeat function can be inactivated.

Power Key is discernible through touch.

No biometric forms of user identification are used.

No auditory output will be provided.

No voice output will be delivered in a public area.

Page 10 of 16