the default level after every use.

Criteria

(g)Color coding shall not be used as the only means of conveying information, indicating an action, prompting a response, or distinguishing a visual element.

(h)When a product permits a user to adjust color and contrast settings, a range of color selections capable of producing a variety of contrast levels shall be provided.

(i)Products shall be designed to avoid causing the screen to flicker with a frequency greater than 2 Hz and lower than 55 Hz.

(j)Products which are freestanding, non-portable, and intended to be used in one location and which have operable controls shall comply with the following:

(j)-(1)The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion of the product within the 48 inch length (see Figure 1 of this part).

(j)(2) Products which are freestanding, non-portable, and intended to be used in one location and which have operable controls shall comply with the following: Where any operable control is 10 inches or less behind the reference plane, the height shall be 54 inches maximum and 15 inches minimum above the floor.

(j)(3) Products which are freestanding, non-portable, and intended to be used in one location and which have operable controls shall comply with the following: Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor.

(j)(4) Products which are freestanding, non-portable, and intended to be used in one location and which have operable controls shall comply with the following: Operable controls shall not be more than 24 inches behind the reference plane.

Supporting Features

Not Applicable

Supports

Supports

Supports

Supports

Supports

Supports

Remarks and explanations

Color coding is not used without description.

Color contrast levels can be adjusted.

[For Touch Panel]

Applicable.

Applicable

Applicable.

Operable control is 5.5 inches behind the reference plane.

The height is 41 inches above the floor.

Platen cover also meets the requirement in (j)-2 because it can be stopped at any position.

Return to the top of the page.

Page 11 of 16

Page 11
Image 11
Sharp MXM503N, MXM283N, MXM363N, MXM453N manual Default level after every use