Nortel Networks 10BASE-T manual Self-Test Screen After Resetting to Default Settings

Using the BayStack 410-24T 10BASE-T Switch

The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test screen (Figure 3-55), which is followed by the Nortel Networks logo screen (Figure 3-56).

BayStack 410-24T Self-Test
CPU RAM test	... Pass
ASIC addressing test	... Pass
ASIC buffer RAM test	... Pass
ASIC buffer stack init test	... Pass
Port internal loopback test	... Pass
Cascade SRAM test	... Pass
Fan test	... Pass
Self-test complete.

Figure 3-55. Self-Test Screen After Resetting to Default Settings

Note: The Self-Test screen remains displayed only if the self-test detects a fatal error.

3-128 309985-C Rev 00