
Using the Console Interface
| MultiLink Trunk Configuration |
| |
Trunk | Trunk Members (Unit/Port) | STP Learning Trunk Mode | Trunk Status |
1 | [ 3/6 | ][ | 3/7 | ][ 3/9 | ][ 3/17 ] [ Normal | ] | Basic | [ Enabled | ] | |||
2 | [ 4/25 | ][ | 4/26 | ][ | / | ][ | / | ] [ Normal | ] | Basic | [ Enabled | ] |
3 | [ 6/13 | ][ | 6/14 | ][ | / | ][ | / | ] [ Normal | ] | Basic | [ Enabled | ] |
4 | [ 5/19 | ][ | 5/20 | ][ | / | ][ | / | ] [ Normal | ] | Basic | [ Enabled | ] |
5 | [ 8/22 | ][ | 8/23 | ][ | / | ][ | / | ] [ Normal | ] | Basic | [ Enabled | ] |
6 | [ 3/2 | ][ | 1/2 | ][ 7/2 | ][ 5/6 | ] [ Normal | ] | Basic | [ Disabled ] | |||
Trunk | Trunk Name |
|
|
|
|
|
|
|
|
|
-----
1 [ U3:T1 to FS2]
2 [ U4:T2 to S2]
3 [ U6:T3 to S2]
4 [ U5:T4 to S3]
5 [ U8:T5 to S4]
6 [ Distributed Trunk]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Figure 3-25. MultiLink Trunk Configuration Screen
| Table |
Table | MultiLink Trunk Configuration Screen Fields |
|
|
Field | Description |
|
|
Trunk | Column header for the |
| Trunk column indicates the trunk (1 to 6) that corresponds to the switch ports specified in |
| the |
Trunk Members The Trunk Members column contains fields in each row that can be configured to create
(Unit/Port) the corresponding trunk. The Unit value in the (Unit/Port) field is configurable only when the switch (unit) is part of a stack configuration. It indicates that the trunk members in this row are associated with the specified unit number configured in the Unit field. Each switch port can only be a member of a single trunk. The appropriate trunk number for each trunk member configured within this field is shown adjacent to the corresponding switch port in the Port Configuration screen and the Spanning Tree Configuration screen.
Default | blank field |
Range | 1 to 8 or 1 to 28 (depending on model type) |
| (continued) |
|
|
|