Nortel Networks 10BASE-T describes the MultiLink Trunk Utilization screen fields, Traffic Type

Using the BayStack 410-24T 10BASE-T Switch

		MultiLink Trunk Utilization
Trunk	Traffic Type	Unit/Port	Last 5 Minutes	Last 30 Minutes	Last Hour
-----	-------------	---------	--------------	---------------	---------
5	[ Rx and Tx ]	8/22	45.0%	35.0%	50.0%
		8/23	55.0%	25.0%	70.0%
6	[ Rx and Tx ]	3/2	65.0%	30.0%	55.0%
	[ Rx and Tx ]	1/2	45.0%	50.0%	35.0%
	[ Rx and Tx ]	7/2	25.0%	40.0%	50.0%
	[ Rx and Tx ]	5/6	75.0%	80.0%	55.0%

Press Ctrl-P to display utilization for trunks 1-4.

Use space bar to display choices, press <Return> or <Enter> to select choice. Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-27. MultiLink Trunk Utilization Screen (2 of 2)

	Table 3-23 describes the MultiLink Trunk Utilization screen fields.
Table 3-23.	MultiLink Trunk Utilization Screen Fields
Field	Description
Trunk	Column header for the read-only fields in this screen. The read-only data displayed in
	this column indicates the trunk (1 to 6) that corresponds to the switch ports specified
	in the Port field.
Traffic Type	Allows you to choose the traffic type to be monitored for percent of bandwidth
	utilization (see Range).
	Default	Rx and Tx
	Range	Rx and Tx, Rx, Tx
Unit/Port	Lists the trunk member ports that correspond to the trunk specified in the Trunk
	column. The (Unit/) extension to the Port column name appears only when the switch
	(unit) is part of a stack configuration. It indicates that the ports in this row are
	associated with the specified unit number configured in the Unit field.

(continued)

3-64 309985-C Rev 00