Nortel Networks 10BASE-T manual Vlan Workgroup Summary, Vlan Port Configuration Screen Example

Introduction to the BayStack 410-24T Switch

VLAN Port Configuration

Unit:	[ 1	]
Port:	[ 8		]
Filter Tagged Frames:	[ No		]
Filter Untagged Frames:	[ No		]
Filter Unregistered Frames:	[ No		]
Port Name:	[ Molly's port ]
PVID:	[	3 ]
Port Priority:	[ 0	]
Tagging:	[ Untagged Access ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-30. VLAN Port Configuration Screen Example

VLAN Workgroup Summary

This section summarizes the VLAN workgroup examples discussed in the previous sections of this chapter.

As shown in Figure 1-31, switch S1 (a BayStack 410-24T switch) is configured with multiple VLANs:

•Ports 1, 6, 11, and 12 are in VLAN 1.

•Ports 2, 3, 4, 7, and 10 are in VLAN 2.

•Port 8 is in VLAN 3.

Because switch S4 does not support 802.1Q tagging, a single switch port on each switch must be used for each VLAN (see “VLANs Spanning Multiple Untagged Switches” on page 1-44).

309985-C Rev 00 1-51