Nortel Networks 10BASE-T manual Display Event Log, Event Log Screen

Using the Console Interface

Display Event Log

This section describes the various functions of the Event Log screen (Figure 3-49).

When the switch is part of a stack configuration, the Event Log screen displays only the data for the specific unit you are connected to through the Console/ Comm port. However, if you are connected to a stack unit through a TELNET session, the Event Log screen displays the data for the base unit of that stack configuration.

Note: This screen does not refresh dynamically to show new entries. To refresh the screen, press [Ctrl]-P.

Choose Display Event Log (or press e) from the main menu to open the Event Log screen.

		Event Log
Entry Number:	4	sysUpTime:	00:14:36	Reset Count:	2
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number:	3	sysUpTime:	00:13:35	Reset Count:	2
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number:	2	sysUpTime:	00:00:53	Reset Count:	2

Successful connection from IP address: 38.227.40.8, access				mode: no security.
Entry Number: 1	sysUpTime:	00:00:00	Reset	Count: 1
Software downloaded to BayStack Model		410-24T HW:Revx FW:Vx.xx SW:Vx.x.x.x

Press Ctrl-P to see previous display. Press Ctrl-N to see more entries. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-49. Event Log Screen

309985-C Rev 00 3-121