Introduction to the BayStack 410-24T Switch
Port-Based Mirroring Configuration
Figure 1-51 shows an example of a port-based mirroring configuration where port 23 is designated as the monitor port for ports 24 and 25 of switch S1. Although this example shows ports 24 and 25 monitored by the monitor port (port 23), any of the trunk members of T1 and T2 can also be monitored.
Note: Trunks cannot be monitored and trunk members cannot be configured as monitor ports (see “MultiLink Trunking Configuration Rules” on
page
StackProbe | Monitor port | ||||
|
|
|
|
| (port 23) |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
Port X | S1 | |
(port 25) | ||
| ||
F | T 1 | |
Port Y | ||
F | (port 24) | |
S2 | T2 | |
| ||
| S3 | |
| BS41037A |
Figure 1-51. Port-Based Mirroring Configuration Example
Figure 1-52 shows the Port Mirroring Configuration screen setup for this example.
|
