Nortel Networks 10BASE-T manual Verifying the Installation Using the Self-Test Screen

Installing the BayStack 410-24T Switch

Verifying the Installation Using the Self-Test Screen

If a monitor is connected to the switch (see “Console/Comm Port” on page 2-10), you can observe the BayStack 410-24T switch Self-Test screen (Figure 2-11 shows an example of a standalone switch Self-Test screen).

The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test screen, which is followed by the Nortel Networks Logo screen (Figure 2-12).

Note: The Self-Test screen remains displayed only if the self-test detects a fatal error.

BayStack 410-24T Self-Test
CPU RAM test	... Pass
ASIC addressing test	... Pass
ASIC buffer RAM test	... Pass
ASIC buffer stack init test	... Pass
Port internal loopback test	... Pass
Cascade SRAM test	... Pass
Fan test	... Pass
Self-test complete.

Figure 2-11. BayStack 410-24T Switch Self-Test Screen

Note: The Self-Test screen for a switch that is participating in a stack

configuration includes an additional test: Cascade SRAM test.

309985-C Rev 00 2-15