Nortel Networks 10BASE-T Describes the Snmp Configuration screen fields, Community String

Using the Console Interface

SNMP Configuration

The SNMP Configuration screen (Figure 3-4) allows you to set or modify the SNMP configuration parameters.

Choose SNMP Configuration (or press m) from the main menu to open the SNMP Configuration screen.

	SNMP Configuration
Read-Only Community String:		[ public ]
Read-Write	Community String: [ private ]
Trap #1 IP	Address:	[ 0.0.0.0 ]
Community String:		[	]
Trap #2 IP	Address:	[ 0.0.0.0 ]
Community String:		[	]
Trap #3 IP	Address:	[ 0.0.0.0 ]
Community String:		[	]
Trap #4 IP	Address:	[ 0.0.0.0 ]
Community String:		[	]
Authentication Trap:		[ Enabled		]
AutoTopology:		[ Enabled		]
Enter text, press	<Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.			Press Ctrl-C to return to Main Menu.

Figure 3-4. SNMP Configuration Screen

Table 3-3 describes the SNMP Configuration screen fields.

Table 3-3.	SNMP Configuration Screen Fields
Field		Description
Read-Only		The community string used for in-band read-only SNMP operations.
Community String		Default	public
		Range	Any ASCII string of up to 32 printable characters
			(continued)
309985-C Rev 00			3-13